The Flygt brand has a long history of product development and solution development in water transportation and wastewater treatment. We are experts in sewage pumps, and our goal is to provide customers with outstanding and valuable solutions. Our experience comes from thousands of people around the world who are using our products in wastewater applications, and we will do our best to provide you with a satisfactory solution.
Monitoring equipment
All stator windings and main bearings of this series of pumps are equipped with temperature sensors. If liquid seeps into the stator casing of the pump, the float switch sensors located below the bearings and stator end coils will shut down the operation of the pump
authentication
These pumps are in accordance with national and international standards (IEC 34-1, CSA) They can also be made into explosion-proof, engineering standards and European standards, and can provide product certificates from major classification societies
anticorrosive
For corrosive applications, these pumps can be equipped with zinc anodes, additional corrosion resistant external seals, epoxy coating, stainless steel shafts, and impellers
motor
Squirrel cage, high-performance, asynchronous motor designed and manufactured by Flygt specifically for submersible applications,.
cooling
An efficient cooling system using pumped liquid as a coolant
Bearing
A roller bearing and one or two angular contact ball bearings can prevent water from passing through the bearings in the event of leakage.
seal up
Two sets of independently working mechanical shaft seals with dual safety design, manufactured by Flygt, are designed and enjoy exclusive rights.
Oil cavity
In addition to lubricating seals, the oil chamber can also remove heat from the motor and bearings, and the oil chamber can also prevent liquid infiltration.
Wear ring
Simple replacement ensures efficient maintenance.
Agitator
"The high reliability stems from the attention to detail."
1. Cable entry device
Compressible sleeves and cable bushings prevent liquid leakage into the motor.
Internal and external shaft seals
The internal mechanical face seal is designed as a plug-in type, which combines an internal and external seal into a reliable seal that can prevent external foreign matter intrusion.
3. Oil chamber
Contains lubricating oil for sealing and cooling the sealing device, while also preventing leakage.
4. Motor
Multistage Squirrel Cage Asynchronous Motor with Thermal Overload Protection for Direct Start
5. Bearing
The impeller is equipped with a main bearing at the end and a double supporting bearing at the end.
6. Impeller
Efficient double curved blades to accommodate different angles to provide different mixing functions.
7. Jet ring
Increase hydraulic pressure to reduce power consumption
