High pressure pile washing pump is one of the necessary equipment in the construction process. It can inject materials such as water or sand into concrete under high pressure to form concrete columns, achieving the effect of strengthening civil structures. However, this type of equipment has a short service life and requires regular maintenance to ensure its normal operation. Next, let's discuss the maintenance methods of high-pressure pile washing pump.
1、 Routine maintenance of the machine
1. Clean the oil circuit
The oil circuit is an important part of the high-pressure pile driving pump, and keeping the oil circuit clean is a guarantee for the normal operation of the machine. At the end of each day's operation, the oil circuit should be cleaned with a cleaning agent, while paying attention to removing dust and sediment from the oil circuit. Before cleaning, stop the machine and turn off the power supply.
2. Check the cooling water tank
The cooling water tank is the main cooling device of the machine, and the water level in the tank must be kept within an appropriate range at all times. Check the water level in the water tank at least once a week to ensure that the water level is in a good state. If the water volume is too low, it is necessary to add water, but do not exceed the high water level in the tank z.
3. Clean the fan and radiator
The fan and radiator are the main heat dissipation devices of the machine, and should be cleaned frequently. Use a broom to gently clean the dust and sediment on the fan, while using compressed air to blow the dust and sediment away. The radiator can be gently cleaned with a soft bristle brush, but do not use a hard bristle brush.
4. Clean the nozzle
The nozzle of the high-pressure pile driving pump is often blocked by debris, which can lead to problems such as uneven sprayed material and insufficient pressure. Therefore, it is necessary to clean the nozzle frequently. After removing the nozzle, clean it with detergent or high-pressure water, and pay attention to wiping it clean.
2、 Regular maintenance of the machine
1. Replace the oil, air filter element, and oil filter element
The oil, air filter, and oil filter elements of the high-pressure pile driving pump need to be replaced regularly. The oil should be replaced according to the needs of different models, usually once every six months. The air and oil filter elements need to be replaced every 200 hours. Before replacement, stop the machine and replace the crude oil and filter element with a new one.
Replace the belt
When the machine has problems with loose belts, excessive wear, etc., it is necessary to replace the belts. It is recommended to replace the belt once a year, and pay attention to selecting high-quality belts to extend its service life.
3. Maintenance of motor
The motor is the core component of the high-pressure pile driving pump, and it is necessary to regularly check whether the motor operates normally and how worn it is. Regularly inject oil every year to protect the motor from wear due to friction. At the same time, it is possible to regularly check whether the electrical equipment is normal and timely eliminate faults.
In short, as a necessary equipment in construction, high-pressure pile washing pumps require regular maintenance to extend their service life and ensure normal operation. The above content is the basic points for daily maintenance of high-pressure pile washing pump, and is only for reference. If necessary, it is recommended to learn more detailed maintenance information according to the operating instructions for different models.
