Product Characteristics of Reverse Osmosis Marine Water Makers
The equipment has compact structure, small volume, and simple installation.
2. Convenient operation and maintenance, no disassembly for cleaning and maintenance, and easy management.
3. The equipment does not require high inlet water temperature, as long as it can be diluted in any normal temperature seawater between 5 ℃ and 45 ℃. In addition, marine equipment is generally equipped with low power, and the main engine and auxiliary engine work.
Maintenance of Reverse Osmosis Marine Water Generator
Pipeline system
If leakage occurs, it should be handled in a timely manner, tighten the clamping ring or rewind the raw material belt, but pay attention to cleaning up the impurities newly brought into the pipeline, otherwise the high-pressure pump will be damaged.
Pretreatment Equipment for Reverse Osmosis Marine Water Makers
Multi media filter: manual valve control, backwashing and positive flushing before startup, timely flushing out impurities in the filter material, reducing pressure loss.
Security filter: If the filter cartridge leaks, loosen the bolts and replace the sealing gasket.
filter
Core Replacement
After using the filter element for a period of time, there will be impurities suspended on its surface, which will reduce the filtering speed and water flow, and the pressure of the low-pressure gauge will approach zero. At this time, the filter element must be replaced. Otherwise, the machine will stop automatically. Treatment: Shut down the device, open the filter cartridge, and replace it with a suitable filter element.
Cleaning of contaminated filter elements
For contaminated filter elements, first wash them with high-pressure clean water, then immerse them in about 20% hydrochloric acid solution. After the surface turns completely white, rinse them with clean water until the pH value is neutral, and then place them for standby.
Maintenance of high-pressure pump
Do not operate the high-pressure pump in a state of loss of water or semi loss of water.
Do not allow granular impurities to enter the high-pressure pump.
Do not allow the operating pressure of the high-pressure pump to exceed 6.5 MPa.
Non professional personnel are not allowed to disassemble the high-pressure pump by themselves.
Zhuhai Zhongchuan Water Treatment Equipment Co., Ltd. has professional maintenance and management personnel.
